2 Product Overview
Finisher-B1 (optional)
13
12
11
2
10
No.
Component
1
Tray attachment
2
Booklet unit (optional)
3
Booklet unit side cover
4
Booklet staple cartridge
5
Top cover
6
Finisher tray
7
Creaser unit
8
Staple cartridge
9
Front door
10
Front transport cover
11
Hole punch waste container
12
US 2/3 Hole Punch Kit
(US standard) (optional)
2/4 Hole Punch Kit
(optional)
48
Install this attachment when delivering A4
finisher tray without stapling.
For more information, refer to "Installing the Tray Attachment on Finisher-
B1" (P.69).
Staples creased outputs.
Open this cover when replacing the booklet staple cartridge.
Contains staples. Remove this cartridge when replacing or adding
staples, or clearing staple jams.
Open this cover to clear paper jams.
Stapled or creased outputs are delivered here.
Creases outputs in half.
Contains staples. Remove this cartridge when replacing or adding
staples, or clearing staple jams.
Open this cover when clearing paper jams or replacing staples.
Open this cover when discarding punch scraps.
Collects scraps from the puncher.
Punches holes in outputs.
Note
• The distance between the two holes made with the US 2/3 Punch
Kit (US standard) is 70 mm, which is different from the 80 mm
distance made with the 2/4 Hole Punch Kit.
1
2
3
4
5
6
7
8
9
Function
or B5
paper to the