Fuji Xerox ApeosPort-IV 5070 User Manual page 140

3 Copy
2
Place the document slightly away from the top left corner of the document glass, and
close the document glass.
Important • Always use the document glass when copying. You cannot use the document feeder with
For information on how to specify the orientation of a document, refer to "Original Orientation
(Specifying the Orientation of Loaded Documents)" (P.108).
3
Select [ID Card Copy] on the [Output Format]
screen.
3
4
Select [On].
Off
Disables ID card copying.
On
Enables ID card copying.
140
this feature.
• Specify the orientation of the original document correctly.
• If the edges of the image are missing, slightly move the card inward on the document glass
so that the whole image can be scanned.
• When a reduced size is specified to copy an ID card, the machine may copy the ID card in a
different orientation from the original orientation depending on the magnification ratio
specified. For information on the copy magnification ratio for ID Card Copy, refer to "5 Tools"
> "Copy Service Settings" > "Copy Control" > "ID Card Copy - Reduce/Enlarge" in the
Administrator Guide.