Fuji Xerox ApeosPort-IV 5070 User Manual page 60

2 Product Overview
No. Component
7 <Interrupt> button
8 <Clear All> button
9 <Stop> button
10 <Start> button
11 <Main Power> indicator
2
12 <Error> indicator
13 <Data> indicator
14 <Speed Dial> button
15 <C (Clear)> button
16 <Dial Pause> button
17 Numeric keypad
18 <Copy> button
60
Press this button to suspend a copy or print job in progress to have the
machine process another job. During Interrupt mode, the <Interrupt>
button lights up. The machine exits Interrupt mode when the <Interrupt>
button is pressed again, and resumes the suspended job.
Some types of jobs cannot be executed in Interrupt mode. Refer to "16
Appendix" > "Notes and Restrictions" > "Notes and Restrictions on the
Interrupt Mode" in the Administrator Guide.
Returns the settings you made to the default values. The machine
returns to the same state as when it is powered on.
Press this button to pause the current job or communications.
Press this button to start scanning a document.
Lights up when the main power is switched on.
Note • If the main power is not switched on, the machine will not be
powered on even when the power is switched on.
Blinks if a system error occurs.
This indicator lights up when a problem other than a system error occurs
with the machine, including paper jams and running out of paper.
If the <Error> indicator blinks, contact our Customer Support Center.
For information on the remedies for paper jams and running out of paper, refer
to "15 Problem Solving" in the Administrator Guide.
Blinks when the machine is sending or receiving data.
This indicator lights up when data is stored in the machine's memory,
when received faxes are waiting to be printed, or when faxes are stored
in a folder.
You can check stored scan files in a Folder List. For information on the Folder
List, refer to "4 Machine Status" > "Machine Information" > "Print Reports" >
"Folder List" in the Administrator Guide.
You can check stored fax files in a Stored File List. For information on the
Stored File List, refer to "4 Machine Status" > "Machine Information" > "Print
Reports" > "Job Status/Activity Report" > "Stored File List" in the
Administrator Guide.
You can change the lighting pattern of the <Data> indicator. For more
information, refer to "5 Tools" > "Common Service Settings" > "Other
Settings" > "Data Indicator" in the Administrator Guide.
Press this button to specify a recipient with an address number when
sending a fax or e-mail.
Press this button to cancel a numerical value you have entered with the
numeric keypad.
Press this button to insert a pause into a destination number.
Use the numeric buttons on the keypad to enter the number of copies,
passcodes, and other numerical values.
[Copy] is assigned to this button by default.
Press this button to display the [Copy] screen.
For information on how to assign a service to the button, refer to "1 Before
Using the Machine" > "Customizing the Control Panel" > "Assigning Services
to the Custom Buttons" in the Administrator Guide.
Function