Fuji Xerox ApeosPort-IV 5070 User Manual page 236

4 Fax
Fax Signal Method
Register the following information in the address numbers of initiating stations in
advance.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
Where
Initiating
Station
For information on the setting items to be registered in a primary relay station and a secondary relay
station, refer to the documentations provided with them.
1
Select an address number or group dial number to which a remote relay broadcast is
registered, and press the <Start> button.
4
DTMF Method
The following two types are available in the DTMF method: Auto Send and Manual
Send.
For information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
For information on the setting items to be registered in a primary relay station and a secondary relay
station, refer to the documentations provided with them.
Note
Auto Send (Transmitting without picking up the receiver)
1
Select [New Recipients] to display the keyboard on the touch screen and enter the
destination and password in the following format.
Password
A pre-registered 2-digit number
Note
Relay Station ID
The last two digits of the initiating station address number registered at the primary
relay station
Address Number
The address number for the secondary relay station registered at the primary relay
station
You can register the above dialing format in an address number to send using the address number. For
information on how to register address numbers, refer to "5 Tools" > "Setup" > "Add Address Book
Entry" in the Administrator Guide.
2
Select [+ Add] to perform Multiple Relay Broadcast.
236
Assign the relay station to an address number (0001 to 2000) to set up the
Relay Broadcast feature.
Register the last two digits of the address number of the initiating station
(which is already registered at a primary relay station) as a relay station ID.
Register the address numbers or group dial number of the secondary relay
stations (which are registered at a primary relay station) as broadcast
recipients.
• You can specify any machine that supports our DTMF method feature.
• By default, no password is set. Contact our Customer Support Center to set a password. If a
password is not set, you do not need to enter one.
Contents