Fuji Xerox ApeosPort-IV 5070 User Manual page 23

With Finisher-C1 with Booklet Unit (optional), Side Tray (optional),
and HCF Kit (optional)
1604
25
(Unit: mm)
Do not incline the product at more than 10 degree angle. Otherwise, it may fall
over and cause injuries.
Front
Front
Back
°
10
Always lock the wheels of this product and turn down the adjustable foot to the
floor after installation. Otherwise, it may fall over or slide and cause injuries.
To keep this product in a good performance and condition, always use it in the
following environment:
Temperature: 10 - 32°C (28°C or less at the humidity of 85%)
Humidity: 15 - 85% (62.5% or less at the temperature of 32°C)
When the product is left in a chilly room and the room is rapidly warmed up by
heater, dew condensation may form inside the product and cause a partial
deletion on printing.
100
2138
Back
Left
° °
10 10
Safety Notes
100
693
411
400
Right
Left
Right
10
1
°
23