Changing The Scan Settings - Fuji Xerox ApeosPort-IV 5070 User Manual

5 Scan
3
From the drop-down menu, specify the view
size by selecting [Whole Page] or [Enlarge
View], and set [Current Page].
4
After the confirmation, select [Close] to close the preview screen.

Changing the Scan Settings

You can change the scan settings while scanning the document.
Note
1
Select [Next Original].
5
2
Select [Change Settings].
3
Set [Color Scanning], [Original Type], [Resolution], [Lighten/Darken], [Original
Orientation], [2 Sided Scanning], and [Original Size].
The following shows the reference section for each feature.
"Color Scanning (Selecting an Output Color)" (P.265)
"Original Type (Selecting the Document Type)" (P.267)
"Resolution (Specifying a Scanning Resolution)" (P.305)
"Image Options (Adjusting Scan Density and Image Sharpness)" (P.301)
"Original Orientation (Specifying the Orientation of the Loaded Documents)" (P.312)
"2 Sided Scanning (Scanning Both Sides of a Document)" (P.306)
"Original Size (Specifying a Scan Size)" (P.307)
4
Press the <Start> button.
256
• For [Store to WSD], you cannot change scan settings while scanning the document.