Fuji Xerox ApeosPort-IV 5070 User Manual page 112

3 Copy
Copy Booklet
You can output the copies of scanned documents as they are by specifying [Fold &
Staple]. Select this option when you do not need a document to be copied in booklet
page order.
Note
Covers
You can attach covers to a booklet.
Off
No cover is attached.
Blank Cover
A blank sheet of paper is attached as the cover.
Print on Both
The first and second pages of the document are copied on both sides of the cover.
1 Sided Covers Print Outside
3
The first and last pages of the document are copied on the front side of the cover.
Last Page on Back Cover
Select this check box to copy the image of the last document page onto the last page
of the copy sheets as a back cover. When you use [Divide Output] to divide a booklet
into subsets, the image of the last document page will be copied onto the last page
of the last subset.
Note
Binding Shift
Displays the [Booklet Creation - Binding Shift] screen.
Refer to "[Booklet Creation - Binding Shift] Screen" (P.113).
Divide Output
Displays the [Booklet Creation - Divide Output] screen.
Refer to "[Booklet Creation - Divide Output] Screen" (P.113).
Fold & Staple
Displays the [Booklet Creation - Fold & Staple] screen.
Refer to "[Booklet Creation - Fold & Staple] Screen" (P.113).
Note
Paper Supply
Displays the [Booklet Creation - Paper Supply] screen.
Select the tray to be used for body pages from [Main Body Tray], and the tray for cover
pages from [Cover Tray]. Select the same size of paper for [Main Body Tray] and
[Cover Tray], and also select the trays with paper loaded in landscape orientation ( ).
When [Bypass] is selected, the [Tray 5] screen is displayed. For more information, refer to "[Tray 5]
Screen" (P.90).
112
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• Depending on the number of pages in the original document, a blank page may be inserted
before the last page of a booklet.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.