Cap Assembly Removal - Epson Stylus COLOR 800 Service Manual

Disassembly and Assembly
Figure 3-38. Sub Ink Drain Pad
REQUIRED ADJUSTMENT
Perform necessary adjustment and data input referring to Table 4-1 in Chapter 4 when
the printer mechanism is replace with a new one.

3.13.1 Cap Assembly Removal

1. Remove the printer mechanism. (Refer to Section 3.13.)
Figure 3-39. Tube Removal
2. Release the CR lock lever using tweezers, and slide the CR assembly left.
3. Remove 1 screw (CBS, 3x6, F/Zn) securing the cap assembly to the top frame.
4. Remove both tubes from the black and color caps carefully. (See Figure 3-39.)
5. Remove the cap assembly from the printer mechanism.
3-31
Rev. A
Download Service Manual and Resetter Printer at http://printer1.blogspot.com