Epson Stylus COLOR 800 Service Manual page 89

EPSON Stylus &2/25 800
Follow the instructions below when installing the hopper assembly into the ASF frame
with the paper loading assemblies mounted on it: (See Figure 3-29.)
1. Note the direction to place the compression spring. One end is bent straight
inward. Be sure to insert the straight end facing up.
2. Hook the straight end to the frame as shown in Figure 3-29.
3. Insert tweezers through the cutout in the back of the ASF frame to release the
tabs after mounting the hopper assembly. (See Figure 3-29.)
When installing the LD roller shaft into the ASF frame after mounting both paper loading
assemblies, shift the right paper loading assembly to the right edge of the ASF frame,
then fix it by aligning the grroove in the back of the paper loading assembly, however,
moves freely from left to right or vice versa. (See Figure 3-30)
3-24
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Figure 3-30 Paper Loading Roller Installation
Figure 3-29. Releasing the Compression Spring
Rev. A