Download Print this page

Epson Stylus COLOR 800 Service Manual: Printer Initialization

Hide thumbs

Advertisement

EPSON Stylus &2/25 800

1.6.6 Printer Initialization

This printer has the following three initialization types: Power-on initialization, Operator initialization, and
Software initialization.
Power-on Initialization
‰Triggers
Turning on the printer
Cold reset command (remote RS command).
‰Actions performed:
‰Initializes the printer mechanism.
‰Clears input data buffer.
‰Clears download character set.
‰Clears print buffer.
‰Refer to Section 1.5.7, Initialization Items and Values
Operator Initialization
‰Triggers
Turning the printer off and back on again within 10 seconds
The printer recognizes the INIT signal (negative pulse) on the
parallel interface.
‰Actions performed
‰Clears input data buffer.
‰Clears download character set.
‰Clears print buffer.
‰Refer to Initialization Items and Values
Software Initialization
‰Trigger
ESC @ command
‰Actions performed
‰Clears print buffer.
‰Refer to Initialization Items and Values
1-24
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Rev. A

Advertisement

Chapters

Troubleshooting

   Also See for Epson Stylus COLOR 800

   Related Manuals for Epson Stylus COLOR 800

Comments to this Manuals

Symbols: 0
Latest comments: