Epson Stylus COLOR 800 Service Manual page 145

14. If the value input is incorrect, press "SPACE" and enter the correct value. If the input values are
correct, press the "ENTER" key to proceed to the menu shown below.
15. Enter "2" for "Select menu : ?" to select "S.F. paper print test" in the menu, then press "ENTER"
key, and the printer outputs the result of the Bi-d adjustment, along with the results of other
adjustments.
16. Look at the output to check if the alignment is satisfactory. If not, enter "9" for "Select menu : ?" to
select "Return to the MENU", then press "ENTER" key.
17. Repeat the steps 8 to 16 until the output is satisfactory, then enter "9" for "Select menu : ?" in the
menu shown in Figure 4-39 and press "ENTER" key to return to the sub menu.
18. If there is no more adjustments to be performed, enter "9" for "Select menu : ?" to select
"Customer data change/End" in the menu, then press "ENTER".
19. Enter "9" for "Select menu : ?" to exit the program.
Rev. A
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Stylus COLOR 800 J70C00E
Customer : Sstandard cistpmer DATA <
.......................
........................
GOS paper print test
S.F. paper print test ...........................
O.Q.A. print test .................................
Cleaning ........................
Return to the MENU .......................
Letter paper print test
Select Menu ?_
MC/No.
Black voltage value : 24B16
Color voltage value : 14B14
Figure 4-39 Setting Menu (3) for Print Inspection
> 12-03-0996
****
1
2
5
0
9
7
: 000
Adjustment
4-25