Epson Stylus COLOR 800 Service Manual page 82

Place the connectors for the printer mechanism back in the cable clamp after installing
the C202 PSB/PSE board assembly.
Tightening torque for the screws (CBS, 3X6, F/Zn) = 8 ~ 10 kg-cm.
When connecting the cable for the C202 PSB/PSE board to CN4 on the C202 MAIN
board, insert the cable through the slot, as shown in Figure 3-18.
Rev. A
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Figure 3-18. Removal of Cable for CN4
Disassembly and Assembly
3-17