Epson Stylus COLOR 800 Service Manual page 92

5. Insert tweezers into the slit in the back of the ASF HP sensor, and release the clips. Then
remove the ASF HP sensor. (See Figure 3-34.)
When mounting the detection wheel onto the LD roller shaft, push the wheel into the
shaft until it clicks.
The bushing at left end of the LD roller shaft must be located on the right of the left
hopper release lever. (See Figure 3-32.)
Rev. A
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Figure 3-34. ASF HP Sensor Removal
Disassembly and Assembly
3-27