Download Print this page

Advertisement

‰ Flow Chart 3-2 : The printer feeds paper abnormally.
Continued from Figure 5-4.
(A)
If the load button
is pressed or the printing
operation is activated,
the fatal error
occurs.
Is the ASF/pump
motor connector cable
securly connected to the
CN11?
Is the ASF
HP sensor connector
cable securly connected
to the CN7?
Is the ASF HP sensor
functioning normally?
Is the resistance
of the ASF/pump motor
coil normal?
Is the gear (27.2)
disengaged with
the ASF LD shaft?
Engage the gear (27.2)
with the ASF LD shaft.
Rev. A
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
pressed or the printing
No
operation is activated, the printer
feeds paper to the
Yes
Replace the PE sensor.
Yes
Connect the ASF/pump motor
connector cable to the CN7.
Replace the ASF HP sensor.
Replace the ASF/pump motor.
Replace the MAIN board.
Figure 5-5. Flow Chart 3-2
If the
load button is
Yes
middle way
and
paper empty error
occurs.
Is the
No
operation
normal?
Yes
Connect the ASF/pump motor
connector cable to the CN11.
Is the
operation
normal?
Is the
operation
normal?
Is the
operation
normal?
Is the
operation
normal?
Troubleshooting
Check that the connector is
connected to the CN8.
Is the
Yes
operation
normal?
No
Is the PE
No
sensor functioning
normally?
Yes
Replace the MAIN board.
END
END
5-7

Advertisement

Table Of Contents

Troubleshooting

   Also See for Epson Stylus COLOR 800

   Related Manuals for Epson Stylus COLOR 800

Comments to this Manuals

Symbols: 0
Latest comments: