Epson Stylus COLOR 800 Service Manual page 134

EPSON Stylus &RORU 800
7. Press "ENTER" key, and the menu below appears.
8. Enter "3" for "Select menu : ?" to select "Head angular adjustment" in the menu, then press
"ENTER" key.
9. Enter a dummy number in 3 digits such as "000" or "111" for "MC No.", and the head angular
adjustment pattern is printed out.
; When the MC number is entered, the head angular adjustment pattern is printed and the following
message appears on the screen;
"Space" key to print again ("Return" to the MENU) ("0" key to cleaning/ "E" key to
escape to the error)
If you identify missing dots on the pattern, you can enter "0" to reprint the adjustment pattern after
performing the head cleaning. The black and color head cleaning is executed either individually or
together, which you can select. This cleaning is same as CL2 cleaning.
10. Look at the output to check if the lines are printed at the regular interval. Figure below shows how to
move the head angular adjust lever to adjust different misalignment patterns for each head.
Black Printing
Move the lever
Move the lever
right.
left.
Correct pattern
4-14
Download Service Manual and Resetter Printer at http://printer1.blogspot.com
Stylus COLOR 800 J70C00E
Customer : Standard Customer Data < **** > 12-03-1996
..............................
Ink charge
Write to the Head voltage value
..........................
.............
All adjustment
.............
Head angular adjustment
BK.-M Linear adjustment
Head GAP timming adjustment .....................
Bi-d adjustment
......................
Print inspection
........................
Ink discharge
Customer data change/End
Select Menu ?_
BI-D (center value 0,0)
Gap Timming (center value 0,0)
Figure 4-18. "Adjustment/Inspection" Sub Menu
CAUTION
Color Printing
Move the lever
right.
Correct pattern
Figure 4-19. Use of the Head Angular Adjust Lever
....... 0
1
2
3
.......
4
5
6
7
8
...........
9
Move the lever
left.
Head Angular Adjustment Lever
Rev. A