11/Wiring Harness, Battery; Removing The Main Fuse; Installing The Main Fuse; Changing The Fuses Of Individual Power Consumers - KTM 350 EXC-F EU 2012 Repair Manual

11/WIRING HARNESS, BATTERY

Removing the main fuse

15.1

Installing the main fuse

15.2
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses are used.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.

Changing the fuses of individual power consumers

15.3
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preliminary work
–
Switch off all power consumers and switch off the engine.
–
Remove the air filter box lid. (
Main work
–
Remove the protection cover
Info
The main fuse
–
Remove main fuse
400270-10
–
Insert the main fuse.
Fuse (58011109110) (
Info
A reserve fuse
Replace a burned-out fuse
–
Replace the protection cover.
–
Install the air filter box lid. (
400273-10
Preliminary work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
Main work
–
Open fuse box cover
101398-10
–
Remove the defective fuse.
Guideline
Fuse 1 - 10 A - EFI control unit
Fuse 2 - 10 A - fuel pump
Fuse 3 - 10 A - high beam, low beam, parking light, tail light, license plate lamp
Fuse 4 - 10 A - horn, brake light, turn signal, radiator fan (optional)
(XCF‑W, EXC‑F EU/AUS, EXC-F SIX DAYS)
Fuse 5 - not used
101497-10
p. 67)
.
1
is located in the starter relay
2
.
2
p. 196)
is located in the starter relay.
1
only by an equivalent fuse.
2
p. 67)
p. 69)
.
1
90
under the filter box cover.
3