Table of Contents
Advertisement
EAS31414
REMOVING THE FUEL HOSE
1. Remove:
• Fuel hose connector cover "1"
2. Disconnect:
• Fuel hose "2"
EWA15910
WARNING
Cover fuel hose connections with a cloth
when disconnecting them. Residual pres-
sure in the fuel lines could cause fuel to
spurt out when removing the hose.
ECA21750
NOTICE
• Be sure to disconnect the fuel hose by
hand. Do not forcefully disconnect the
hose with tools.
• Although the fuel has been removed from
the fuel tank, be careful when removing the
fuel hose, since there may be fuel remain-
ing in it.
• Do not disconnect the fuel hose from the
fuel hose connector. Disconnect the con-
nector from the fuel pump.
TIP
Before removing the hose, place a few rags in
the area under where it will be removed.
2
1
2
EAS31415
INSTALLING THE FUEL HOSE
1. Connect:
• Fuel hose
2. Install:
• Fuel hose connector cover
ECA22030
NOTICE
When installing the fuel hose, make sure that
it is securely connected, and that the fuel
hose connector cover is in the correct posi-
tion, otherwise the fuel hose will not be prop-
erly installed.
TIP
• Wipe up any fuel remaining in the recess "a" in
the fuel pump with a dry rag "1".
• After installing the fuel hose connector cover,
make sure that it is installed securely.
1
4-21
GENERAL CHASSIS (5)
Advertisement
Chapters
Table of Contents
