Xerox Phaser 3100MFP Service Manual page 27

IQ 1 Checking the Quality of Prints and Calibrating the Scanner
To check or improve the quality of prints, you should first calibrate the scanner. Follow this proce-
dure:
1. Press enter * then A on the keyboard and confirm with OK. The machine reboots.
2. Start making copies of documents on the document glass and check the quality of the copies.
If the problem persists and if it is related to the scanner:
• Repeat the calibration procedure (step 1). If the problem persists and if it is related to the
printer (the scanner still provides unsatisfactory results):
1. Press then enter 56 on the keyboard. The machine prints the list of printer parameters.
2. Check the printer's printing and copying parameters.
3. Check the print cartridge.
Phaser 3100 MFP 04/08
Image Quality
3-3