Scp 2 Cleaning - Xerox Phaser 3100MFP Service Manual

Service Call Procedures

SCP 2 Cleaning

To keep the machine in good working condition, the following operations should be carried out
regularly:
• Cleaning the paper transport rollers of the ADF (3100 MFP/X only).
• Cleaning the paper separator (3100 MFP/X only).
• Cleaning the CIS window of the scanner.
• Cleaning the control panel keys and the printer covers.
• Cleaning the printer with a soft cloth, never use abrasives or detergents.
Paper Transport Rollers (3100 MFP/X only)
1. Set the On/Off switch to Off (position 0).
2. Open the ADF cover.
3. Clean the rollers of the document feeder and feed shafts, and also the two idler rollers located
on the mobile part of the scanner, with a lint-free cloth moistened in isopropyl alcohol. To
clean them, rotate them in the same direction as during paper transport.
Recommended interval: from 2 to 6 months, depending on utilization.
1-4
Figure 1
04/08 Phaser 3100 MFP