REP 12 Speaker
Parts List on:
PL 2
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
•
Remove the printer front door assembly and the right side cover,
•
Remove the CPU shield plate,
Removal
1. Disconnect the speaker connector from the CPU board.
Before removing the speaker harness from the ferrite tube make a note of the routing.
2. Remove the speaker connector from its ferrite tube and cable guide, Figure 1.
Phaser 3100 MFP
WARNING
REP
11.
CAUTION
Figure 1
04/08
Repairs and Adjustments
REP
3.
4-33