Rep 30 Thermostat - Xerox Phaser 3100MFP Service Manual

Repairs and Adjustments

REP 30 Thermostat

Parts List on: PL 12
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Do not touch the fuser while it is hot.
Preparation:
• Remove the paper exit assembly,
• Remove the fusing lamp and hot roller,
Removal
1. Remove the thermostat, Figure 1 and Figure 2.
4-74
WARNING
WARNING
REP 26.
REP 27.
Location of the thermostat on the fuser
Figure 1
04/08 Phaser 3100 MFP