Xerox Phaser 3100MFP Service Manual page 24

Status Indicator RAPs
RAP 2 Jam Detection
Jam 1. Paper jam at the paper cassette
When the registration sensor does not turn on within 2.52 seconds after the paper pick-up clutch
for the paper cassette turns on.
Jam 2. Paper did not pass the registration sensor
When the registration sensor does not turn off within the specified time for passing each paper
size (see below) + 3 seconds after the registration sensor turns on.
Paper Size A4SEF
Specified 2555
Time
(msec)
Jam 3. Paper did not reach the fusing unit
When the paper exit sensor does not turn on within 1.94 seconds after the registration sensor
turns on.
Jam 4. Paper jam in the fusing exit area
When the paper exit sensor does not turn off within 2.99 seconds after the registration sensor
turns off.
Jam 5. Paper no feed jam in the bypass tray
When the registration sensor does not turn on within 1.72 seconds after the main motor starts.
2-6
A5SEF A5LEF A6SEF
1807 1273 1273
Table 2:
B5SEF B6SEF
2211 1566
04/08
Letter Legal Envelope
SEF SEF (91x191mm)
2400 3059 1643
Phaser 3100 MFP