Gp 17 Administrator Functions - Xerox Phaser 3100MFP Service Manual

GP 17 Administrator Functions

Each one of the administrator functions described here is accessible via a specific sequence of
keys. The alphabetic keys are available via the navigation keys
example, to enter a sequence
1. Press the following key
2. Press the following key *.
3. Press to display all the options available until you reach A. Confirm your choice with OK.
Initializing and Erasing Memory
Before you start, set the 8 bit parameter installation configuration 1 to 1.
Undocumented functions are reserved. Do not try and use functions that are not documented in
this section, this may lead to the permanent loss of data.
Undocumented functions are reserved. Do not try and use functions that are not documented in
this section, this may lead to the permanent loss of data.
• Reset all parameters (user, installer or technical) to the default configuration (factory
configuration):
• Erase the directory:
• Erase the logs:
• Erase the printer counters:
• Reinitialize the flash data (erases all):open the printer front door then:
• Erase all. Reset to default configuration (combination of functions 0 and 8):
Phaser 3100 MFP
* A (launching scanner calibration):
CAUTION
CAUTION
04/08
General Procedures and Information
and via the keyboard. For
6-53