Repairs and Adjustments
REP 15 Machine Disassembly
Parts List on:
PL 2
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Preparation
•
None.
Removal
1. Stand in front of the machine.
2. Remove the control panel
REP
1.
3. Remove the ADF cover
(REP
2) or the platen cover
(REP
38).
4. Remove the front door and the side covers
(REP
3).
5. Remove the CPU module
(REP
11) and the speaker
(REP
12).
6. Remove the platen assembly
(REP
16).
7. Remove the back cover
(REP
13) and the output tray assembly
(REP
14).
Replacement
1. Replacement is the reverse of the removal procedure.
Phaser 3100 MFP
04/08
4-39