Rep 29 Thermistor - Xerox Phaser 3100MFP Service Manual

REP 29 Thermistor

Parts List on: PL 12
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Do not touch the fuser while it is hot.
Preparation
• Remove the paper exit assembly,
Removal
1. Remove the thermistor, Figure 1.
Replacement
1. Replacement is the reverse of the removal procedure.
When reassembling, do not damage the thermistor, and check that the element touches the hot
roller.
Phaser 3100 MFP
WARNING
WARNING
REP 26.
1
Remove 1 screw to remove the thermistor
CAUTION
04/08
Repairs and Adjustments
4-73