Seat / Floor Height - Physipro SPIRAL Owner's Manual

Pediatric tilt in space wheelchair

Table of Contents

ENGLISH

4.4 Seat / floor height :

The height between the seat and the floor of the Spiral tilt in space is adjustable from 14" à 19".

Before adjusting the seat to floor height please refer to the description of limitations.

Modifing seat to floor height:

Unbolt the upper cylinder anchor:

a. Unscrew the bolts (J) and (K) from the upper cylinder anchor (M);

b. Remove the tilt stop (N);

Adjusting the seat / floor height:

a. Raising or lowering the seat plate (P) to the desired seat / floor height;

b. Re bolt the top anchor of the cylinder (M) and the tilt stop (N) with the bolts (J) and

(K);

Ensure the proper function of the tilt:

a. Tilt the seat, then check that there's no space between the components of the tilt;

b. Ensure that the seat returns to the horizontal position without exceeding it;

c. Ensure that there's no interference with other components;

4. Limiting the tilting angle:

(See section: 4.5);

Figure

: Adjusting the seat / floor height

Spiral

Révision 0

juillet 18

Table of Contents