Table of Contents
Advertisement
Owners manual
9.2 Negative Tilt
To facilitate transfer, the NEOX™ can be tilted forward, in a negative tilt, please
follow these steps to do so:
Activate the wheel lock H (figure 47) before positioning the NEOX™ in a
1.
negative tilt. The tilt Ө can vary according to the seat to floor height and
the rear wheels position.
2.
By default, the upright position is 0°. To obtain a negative tilt, move the
adjustment block D and the gas cylinder G forward (figure 48-b).
Position the NEOX™ in a positive tilt and then unscrew bolts E and F using
3.
a 4 mm Allen key and a 10 mm wrench.
To obtain a negative tilt, move the adjustment block D and the gas
4.
cylinder G toward the holes for the negative tilt (figure 48-b).
Replace screw E and F, tighten.
5.
Figure 47-a: Adjustment block
H
Figure 46: Negative Tilt
Figure 47-b: Tilt-in-Space Adjustment
33
ENGLISH
Réf. Ө
Negative tilt
Revision 5
January 2016
Advertisement
Table of Contents
