Firmware Update; Reset To Default - Extron electronics ShareLink 200 User Manual

Firmware Update

Figure 43.
1
Export System Configuration
Use this section to export or import the system configuration file.
Export System configuration:
Export: Export the system configuration to a configuration file
•
NOTE: This option does not export the custom standby image (if one has been
Import: Import the system configuration file to the ShareLink 200
•
2
Firmware Update
Use this section to update the ShareLink 200 firmware. Follow these instructions to
update the firmware.
1.
Download latest firmware file from the Extron website (see
ShareLink 200 Firmware
2. Click Browse... to browse to the firmware file location, and select the firmware
file.
3. Click Update to start firmware update. A warning message and counter are shown
on the screen. After a few minutes, "Complete" is shown on the screen.

Reset to Default

Figure 44.
Click Apply to restore factory default settings.
You can also restore factory default settings using the reset button on the bottom of the
ShareLink 200 (see
Firmware Update
loaded on the standby screen).
on page 45).
Reset to Default
Bottom Panel Features
ShareLink 200 • Using the Embedded Web Pages
1 1
Downloading
on page 4).
2 2
41