Snmp Setup - Extron electronics ShareLink 200 User Manual

SNMP Setup

Simple Network Management Protocol (SNMP) facilitates the exchange of basic network
management information to provide monitoring, control, and to collect error information.
Figure 39.
1
Enable or Disable: SNMP is enabled by default. To disable SNMP, choose Disable.
2
SNMP V2 Panel: The SNMP Community and Write Community values act as
passwords, granting public (read-only) and private (read-write) access to the network
management system.
Community: Default value is set to "public".
•
Write Community: Default value is set to "private".
•
3
SNMP V3 Panel
User Name: Configure the user name of the person in charge of managing the
•
ShareLink 200 through SNMP.
Auth Password (MD5): Configure the Auth password.
•
Priv Password (DES): Configure the Priv password.
•
4
Trap: Configure the trap receiver IP.
1 1
2 2
3 3
4 4
SNMP Setup
ShareLink 200 • Using the Embedded Web Pages 37