Webshare Setup - Extron electronics ShareLink 200 User Manual

WebShare Setup

Figure 41.
1
Auto Refresh Interval (second) Panel
Use this section to configure the refresh interval time (the amount of time that elapses
before the ShareLink 200 refreshes).
Manual Refresh
•
10 - 90 (seconds): Select the best option for the amount of users.
•
2
Access Password Control Panel
Use this section to disable or configure the WebShare access password (this is the
password required when connecting to the ShareLink 200 through WebShare):
Disable: Select to disable the password. This allows users to connect to the
•
ShareLink 200 through WebShare without a password.
Use the same password as "Code": Select this option to make the
•
WebShare access password the same as the Code on the standby screen.
Use the following Code: Enter a custom code to use as the WebShare
•
access password.
1 1
2 2
WebShare Setup
ShareLink 200 • Using the Embedded Web Pages 39