Setting Up The Standby Screen - Extron electronics ShareLink 200 User Manual

Setting Up the Standby Screen

Once the ShareLink 200 is connected and powered on, the default standby screen (figure 4)
appears on the display.
1 1
2 2
3 3
4 4
Figure 4.
1
2
3
4
5
6
Standby Screen
Instructional Screen — Provides instructions for starting a presentation. The
background image of the instructional screen can be customized (see
page 38).
Whiteboard icon ( )— Click to use the display as a whiteboard. This feature allows
the presenter to draw on a blank screen using a mouse or touchscreen (see
Whiteboard Feature on the next page).
USB Player icon ( )— Click to access the USB Player. This feature allows the
presenter to access photos, videos, audio files, and documents directly from the
connected USB flash drive (see
IP Address — Use this IP address to identify and access the ShareLink 200 during
connection (see
Setting up the ShareLink 200 Software
Receiver — Use this SSID (WI-FI name) to identify and access the
ShareLink 200 during connection.
Code — Use this code to access the ShareLink 200 device through the software
(see Connecting to the ShareLink 200 Receiver
customized or disabled (see
5 5
Using the USB Player
on page 10). The code can be
Device Setup on page 32).
ShareLink 200 • Installation
6 6
OSD Setup on
Using the
on page 7).
on page 9).
5