Placing Separator Sheets Between Copies; Copying Multiple Pages Onto A Single Sheet - Develop ineo 3320 User Manual

3. From the printer control panel, navigate to:
>Copy > >Collate > select the collate setting you want > select the number of copies or enter
a number on the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
4. Press the left or right arrow button to scroll to Finish the Job, and then press

Placing separator sheets between copies

1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Separator Sheets
4. Select Between Copies, Between Jobs, Between Pages, or Off.
5. Select the number of copies or enter a number on the keypad, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
6. Press the left or right arrow button to scroll to Finish the Job, and then press

Copying multiple pages onto a single sheet

To save paper, you can copy either two or four consecutive pages of a multiple-page document onto a
single sheet of paper.
Notes:
• Make sure the paper size is set to letter, legal, A4, or JIS B5.
• The copy size must be set to 100%.
User's Guide
- 73 -
.
.
.
.
.