Making Copies Using Paper From A Selected Tray - Develop ineo 3320 User Manual

Making copies using paper from a selected tray

1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Copy from > select the size of the original document
4. Navigate to:
Copy to > > select the tray containing the paper size and type you want to use >
the number of copies or enter a number on the keypad >
5. If there are no trays that contain the paper size and type you want to use, then do the following:
a. Navigate to:
Copy to >
b. Load the size and type of paper into the multipurpose feeder, and then press
Note: If you want to copy another document, then place it on the scanner glass, press the left or
right arrow button to scroll to Scan the Next Page, and then press
6. Press the left or right arrow button to scroll to Finish the Job, and then press
Copying on both sides of the paper (duplexing)
1. Load a document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
User's Guide
> MP Feeder > > select the paper size >
- 69 -
> select
> select the paper type >
.
.
.