Making A Copy Lighter Or Darker; Adjusting Copy Quality - Develop ineo 3320 User Manual

Making a copy lighter or darker

1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass in the upper left corner.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Darkness > adjust the darkness setting > select the number of copies or enter a
number on the keypad >
Note: If you want to copy another document, then place it on the scanner glass, press the left or right
arrow button to scroll to Scan the Next Page, and then press
4. Press the left or right arrow button to scroll to Finish the Job, and then press

Adjusting copy quality

1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the printer control panel, navigate to:
>Copy > >Content Type > select the content type of the original document
4. Press the left or right arrow button to scroll to one of the following:
Text—The content of the original document is mostly text or line art.
-
- Text/Photo—The original document is a mixture of text and graphics or photos.
- Photo—The original document is mostly a photo or an image.
- Graphics—The original document is mostly business-type graphics, such as pie charts, bar
charts, and animations.
User's Guide
- 71 -
.
.