Fax Receive Settings - Develop ineo 3320 User Manual

Fax Receive Settings

Use
Enable Fax Receive
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Rings to Answer
1–25
Auto Reduction
On
Off
Paper Source
Auto
Tray [x]
Multi-Purpose Feeder
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600
Fax Forwarding
Print
Print and Forward
Forward
User's Guide
To
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Scale an incoming fax job so that it fits the size of the paper loaded in the
designated fax source.
Note: On is the factory default setting.
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Print the transmission information at the bottom of each page from a received
fax.
Note: Off is the factory default setting.
Specify the maximum speed in baud at which faxes are received.
Note: 33600 is the factory default setting.
Enable forwarding of received faxes to another recipient.
Note: Print is the factory default setting.
- 148 -