Develop ineo 3320 User Manual page 141

Use
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
-4 to 4
ADF Skew Fix
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Sample Copy
Off
On
User's Guide
To
Specify the contrast used for the copy job.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a copy.
Note: 0 is the factory default setting.
Correct slight skew in the scanned image.
Note: Off is the factory default setting.
Specify if the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness of a copy.
Note: 3 is the factory default setting.
Create a sample copy of the original document.
Note: Off is the factory default setting.
- 141 -