Finishing Menu - Develop ineo 3320 User Manual

Finishing menu

Use
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Copies
1–999
Blank Pages
Do Not Print
Print
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
User's Guide
To
Specify whether two-sided (duplex) printing is set as the user default setting for
all print jobs.
Notes:
• "1 sided" is the factory default setting.
• You can set two-sided printing from the software program.
For Windows users:
Click File >Print, and then click Properties, Preferences, Options, or
Setup.
For Macintosh users:
Choose File >Print, and then adjust the settings from the print dialog and
pop-up menus.
Define the way two-sided pages are bound and printed.
Notes:
Long Edge is the factory default setting. This assumes binding along the
•
long edge of the page (left edge for portrait and top edge for landscape).
• Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Specify whether or not blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
- 162 -