Develop ineo 3320 User Manual page 283

Action
Step 2
Check the quality of the original document.
Is the quality of the original document satisfactory?
Step 3
Clean the scanner glass and the ADF glass using a
clean, lint-free cloth dampened with water.
Is the scanner glass clean?
Step 4
Check the placement of the document or photo.
Make sure the document or photo is loaded
facedown on the scanner glass in the upper left
corner.
Is the document or photo loaded correctly?
Step 5
Send a print job, and then check for print quality
problems.
• From the General Settings menu, adjust the Eco-
Mode settings.
• From the Copy menu, adjust the Darkness setting.
• When the print becomes faded, replace the toner
cartridge.
Is the print quality satisfactory?
User's Guide
Yes
Go to step 3.
Go to step 4.
Go to step 5.
Go to step 6.
- 283 -
No
Increase the scan resolution settings for
a higher-quality output.
See Cleaning the scanner
Place the document or photo facedown
on the scanner glass in the upper left
corner.
See Print quality problems.
glass.