Repeating Defects Appear On Prints; Shadow Images Appear On Prints - Develop ineo 3320 User Manual

Repeating defects appear on prints

Action
Step 1
Measure the distance between the
defects.
Check for a distance between
the defects that equals:
- 97 mm (3.82 in.)
- 47 mm (1.85 in.)
- 38 mm (1.5 in.)
Is the distance between defects
equal to one of the listed
measurements?
Step 2
Replace the imaging unit, and then
resend the print job.
Do the repeating defects still
appear?

Shadow images appear on prints

User's Guide
Yes
Go to step 2.
Contact technical support.
- 256 -
No
1. Check if the distance between
the defects equal to 80 mm
(3.15 in.)
2. Take note of the distance, and
then contact technical
The problem is solved.
support.