Develop ineo 3320 User Manual page 156

Use
ADF Skew Fix
Auto
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Use cc:/bcc:
Off
On
User's Guide
To
Correct slight skew in the scanned image.
Note: Off is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Enable the use of the cc: and bcc: fields.
Note: Off is the factory default setting.
- 156 -