Develop ineo 3320 User Manual page 143

Use
Cancel Faxes
Allow
Don't Allow
Fax number masking
Off
From left
From right
Digits to Mask
0–58
Enable Line Connected
Detection
On
Off
Enable Line in Wrong Jack
Detection
On
Off
Enable Extension In Use
Support
On
Off
User's Guide
To
Specify whether or not the printer cancels fax jobs.
Note: Allow is the factory default setting.
Specify the direction from where digits are masked in an outgoing fax number.
Notes:
• Off is the factory default setting.
• The number of characters masked is determined by the "Digits to mask"
setting.
Specify the number of digits to mask in an outgoing fax number.
Note: 0 is the factory default setting.
This will detect if a phone line is connected.
This will detect if a phone line is connected but in the wrong jack.
This will detect if the extension line is in use (when a phone is plugged into the
second jack and in use).
- 143 -