Printer Fails To Print; Printer Is Making Unusual Noises - Xerox WorkCentre 4265 User Manual

Hide thumbs Also See for WorkCentre 4265:
Table of Contents

Advertisement

Troubleshooting

Printer Fails to Print

Probable Causes
The printer has an error.
The printer is out of paper.
A toner cartridge is empty.
The front door is open.
The power cord is not correctly plugged into
the outlet.
The printer is busy.
The printer cable is disconnected.

Printer is Making Unusual Noises

Probable Causes
There is an obstruction or debris inside the
printer.
®
148
Xerox
WorkCentre
User Guide
Solutions
• To clear the error, follow the onscreen prompts.
• If the error persists, contact your Xerox representative.
Load paper into the tray.
Replace the empty toner cartridge.
• Ensure that the toner cartridge and Smart Kit drum cartridge are
installed and fully seated.
• Ensure that the front and side doors are closed.
Note:
first, then close the side door.
• Turn off the printer, then turn it on again. If the error persists,
contact your Xerox representative.
Turn off the printer, confirm that the power cord is plugged in
correctly to the printer and the outlet, then turn on the printer. For
details, see
persists, contact your Xerox representative.
• A previous print job could be the problem. On your computer,
you can use the printer properties to delete all print jobs in the
print queue.
• Load the paper in the tray.
• At the printer control panel, press the Job Status button. If the
print job does not appear check the Ethernet connection
between the printer and the computer.
• At the printer control panel, press the Job Status button. If the
print job does not appear, check the USB connection between
the printer and the computer. Turn off the printer, then turn it on
again.
• At the printer control panel, press the Job Status button. If the
print job does not appear check the Ethernet connection
between the printer and the computer.
• At the printer control panel, press the Job Status button. If the
print job does not appear, check the USB connection between
the printer and the computer. Turn off the printer, then turn it on
again.
Solutions
Turn off the printer and remove the obstruction or debris. If you
cannot remove it, contact your Xerox representative.
®
4265 Multifunction Printer
For the doors to lock properly, close the front door
Turning the Printer On and Off
on page 40. If the error

Advertisement

Table of Contents
loading

Table of Contents