Printing Booklets; Print Quality - Xerox WorkCentre 4265 User Manual

Printing
To access the Scale options, click the arrow at the right side of the Paper field, then select Other Size.
• No Scaling does not increase or decrease the size of the image from the original.
Automatically Scale changes the print from one standard paper size to another standard paper
•
size. The Original Document Size is scaled to fit on the selected output paper size shown in the
Output Paper Size field.
• Manually Scale changes the output print size by the percentage entered into the field under the
graphic to the right of the Scale Options.

Printing Booklets

With 2-sided printing, you can print a document in the form of a small booklet. Create booklets from any
paper size that is supported for 2-sided printing. The driver automatically reduces each page image and
prints four page images per sheet of paper, two page images on each side. The pages are printed in the
correct order so that you can fold and staple the pages to create the booklet.
When you print booklets using the Windows PostScript or Macintosh driver, you can specify the gutter
and creep.
• Gutter: Specifies the horizontal distance in points between the page images. A point is 0.35 mm
(1/72 in.).
• Creep: Specifies how much the page images shift outward in tenths of a point. Shifting
compensates for the thickness of the folded paper, which can cause the page images to shift
outward slightly when folded. You can select a value from zero to 1 point.
Gutter

Print Quality

Print-quality modes:
• Standard print-quality mode: 600 x 600 dpi
• High Resolution print-quality mode: 1200 x 1200 dpi
• Draft Mode saves toner or ink, producing lower-quality images.
− This mode reduces the amount of toner used for print jobs.
− You can use this feature for draft quality output.
®
80 Xerox WorkCentre
User Guide
®
4265 Multifunction Printer
Creep