Condensation Has Formed Inside the Printer
Moisture can condense inside a printer where the humidity is above 85% or when a cold printer is
located in a warm room. Condensation can form in a printer after it has been sitting in a cold room that
is heated quickly.
Probable Causes
The printer has been sitting in a cold room.
The relative humidity of the room is too high. • Reduce the humidity in the room.
Solutions
• Allow the printer to acclimate for several hours before operation.
• Allow the printer to operate for several hours at room
temperature.
• Move the printer to a location where the temperature and
relative humidity are within the operating specifications.
®
Xerox
WorkCentre
Troubleshooting
®
4265 Multifunction Printer
User Guide
149