Sample Set - Xerox WorkCentre 4265 User Manual

Hide thumbs Also See for WorkCentre 4265:
Table of Contents

Advertisement

Printing
Releasing a Personal Print Job
At the printer control panel, press the Job Status button.
1.
2.
Touch the Personal & Secure Jobs tab.
3.
Touch the folder that holds the print job.
4.
Touch Skip Passcode, then touch OK.
Touch the corresponding print job in the list, then touch Print.
5.
Deleting a Personal Print
At the control panel, press the Job Status button.
1.
2.
Touch the Personal & Secure Jobs tab.
3.
Touch the folder that holds the print job.
4.
Touch the corresponding print job in the list, then touch Delete.

Sample Set

The Sample Set job type allows you to print a sample copy of a multiple-copy job and hold the
remaining copies at the printer. After you review the sample copy, you can select the job name from the
printer control panel to print the additional copies.
Releasing the Remaining Prints After Printing a Sample Set
At the printer control panel, press the Job Status button.
1.
2.
Touch the corresponding print job from the Active Jobs tab.
Touch Release.
3.
The job prints, then is deleted from the printer hard drive.
®
82
Xerox
WorkCentre
User Guide
®
4265 Multifunction Printer

Advertisement

Table of Contents
loading

Table of Contents