Selecting A Location For The Printer - Xerox WorkCentre 4265 User Manual

Selecting a Location for the Printer

• Select a dust-free area with temperatures from 10–30°C (50–90°F), and relative humidity 20–80%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can
cause condensation inside the printer, directly interfering with image transfer.
• Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the
printer. The printer must be horizontal with all four feet in solid contact with the surface. To find the
weight for your printer configuration, see
• Select a location with adequate clearance to access supplies and to provide proper ventilation. To
find the clearance requirements for your printer, see
• After positioning the printer, you are ready to connect it to the power source and computer or
network.
Physical Specifications
Clearance Requirements
®
Xerox WorkCentre
Installation and Setup
on page 180.
on page 180.
®
4265 Multifunction Printer
User Guide
35