Installation And Setup Overview - Xerox WorkCentre 4265 User Manual

Hide thumbs Also See for WorkCentre 4265:
Table of Contents

Advertisement

Installation and Setup

Installation and Setup Overview

Before printing, your computer and the printer must be plugged in, turned on, and connected. Configure
the initial settings of the printer, then install the driver software and utilities on your computer.
You can connect to your printer directly from your computer using USB, or connect over a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network hubs, network switches, modems, Ethernet cables, and USB cables
are not included with your printer and must be purchased separately. Xerox recommends an Ethernet
connection because it is typically faster than a USB connection, and it provides access to CentreWare
Internet Services.
If the Software and Documentation disc is not available, you can download the latest drivers
Note:
from www.xerox.com/office/WC4265drivers.
See also:
Selecting a Location for the Printer
Choosing a Connection Method
Connecting the Printer
Configuring Network Settings
Installing the Software
®
34
Xerox
WorkCentre
User Guide
on page 35
on page 38
on page 38
on page 41
on page 43
®
4265 Multifunction Printer

Advertisement

Table of Contents
loading

Table of Contents