Table of Contents
Advertisement
Using ViewSonic Device Manager
Establishing a Basic Administration Environment
NOTE
• In case that the service IP changes, your ViewSonic Device Manager will prompt you
to select a new service IP when you log in to the management console.
3.2.10 Configuring Auto-Logout for ViewSonic Device Manager
ViewSonic Device Manager allows you to configure its auto-logout to enhance the security of the management
console. When configured, your session will be ended automatically when it's idle for a specific amount of time.
NOTE
• By default, your administrative session will not be logged out automatically.
To configure auto-logout for ViewSonic Device Manager, please do the following:
1. On System tab, click System Settings > General Settings.
2. Click the drop-down menu to select the desired amount of inactivity time.
3. Click Save to apply.
3.2.11 Configuring the Database Source of ViewSonic Device Manager
ViewSonic Device Manager offers two ways to store its management database: one is to store the database on the
same computer where ViewSonic Device Manager is installed; the other is on a different computer. By default, the
management database is stored on the computer where ViewSonic Device Manager is installed.
Using Local Management Database
To use the local management database, please do the following:
1. On System tab, click System Settings > External Database.
32
Advertisement
Table of Contents
