Installing and Upgrading ViewSonic Device Manager
Initial Setup
2.3 Initial Setup
When launching ViewSonic Device Manager for the first time, you need to complete the initial setup. Follow the
instructions below to complete the required configuration:
1. Launch ViewSonic Device Manager on your computer.
2. A window appears prompting you to choose the service IP address and create an administrator account.
Click the drop-down menu to select the desired IP address from the list of available IP addresses, type the
desired account name and password, and then click Save to continue.
NOTE
• Your not connected LAN port may appear in the list of available IP addresses with
the address value 0.0.0.0.
• It's strongly recommended to use a fixed IP address as the service IP of ViewSonic
Device Manager. The change of the service IP may make all the managed clients
become unmanageable.
3. The Login screen appears prompting you to sign in to ViewSonic Device Manager with your credentials
(account name and password).
4. The management interface of ViewSonic Device Manager appears.
10