Table of Contents
Advertisement
Using ViewSonic Device Manager
Managing All Your Clients
8. On the selected client, a warning message appears to notify the user of the planned reboot and allow the
user to cancel the action if necessary.
9. After completion, the system snapshot is added to the Snapshot list.
NOTE
3.4.26 Restoring Client Snapshots
To restore a system copy of a client, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree, and then click the client group to
which the desired client belongs.
2. The Client list appears.
3. Click to select the desired client, and then click Command on the top of the Client list.
4. The Command menu appears.
5. Click to select Install Snapshot.
6. The Install Snapshot window appears prompting you to select a snapshot.
7. Click the drop-down menu to select the desired snapshot, and then click OK to confirm.
8. On the selected client, a warning message appears to notify the user of the planned reboot and allow the
user to cancel the action if necessary.
9. After completion, the client is restored to the desired state.
• To access the Snapshot list, click System tab, and then click Deployment >
Snapshot.
• Refer to section "3.2.6 Managing Client Snapshots" on page 25 for
instructions on how to manage your snapshots.
90
Advertisement
Table of Contents
